> For the complete documentation index, see [llms.txt](https://docs.decharge.network/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.decharge.network/deployment-and-operations/pre-install-checklists/titan-60kw.md).

# Titan (60kW)

Detailed pre-install guide for Titan fast chargers including 3-phase input, grounding, and safety validation.

In addition to the General Requirements mentioned [here](/deployment-and-operations/pre-install-checklists.md), the device specific requirements for DeCharge Titan (60kW) device are as follows:

**Mounting and Foundation**

* Concrete base prepared as per DeCharge installation blueprint
* Safety clearance on all sides
* Anchor bolts installed and visible
* Canopy or shed installed for protection

**Power Input Requirements**

<table><thead><tr><th width="106.800048828125">Voltage</th><th width="124.20001220703125">Transformer</th><th width="359.4000244140625">Cable Size</th><th>Breaker Size</th></tr></thead><tbody><tr><td>415V</td><td>100 KVA</td><td>95 sq.mm aluminium or 60 sq.mm copper</td><td>120A</td></tr></tbody></table>

* Breaker panel must be within an accessible range
* Neutral wire of 0.5 core must be connected using proper lugs
* Neutral-to-earth voltage must be below 2V

**Earthing**

* Two earthing pits required
* Cabling: 25 x 3 mm tinned copper bus bar or 25 sq.mm single-core copper wire
* Lugs: Ring-type aluminium or copper lugs for grounding points

**Internet Connectivity**

* LAN: Cat6 cabling with proper termination and surge protection
* 4G/5G SIM: Valid SIM with strong signals
* Wi-Fi: High-speed router, no competing devices, good coverage

**Safety Infrastructure**

* Safety bollards installed
* LED lighting in place
* Fire suppression systems if required by local code
* Security arrangements if in a commercial or public location

**Documentation Required**

* Confirmation of grid connection or power availability
* Approved CMS form with device mapping
* Signature of host or location owner
* Photographs of breaker, cables, and mounting area

Please fill out the interest-cum-pre-requisite form if you're interested in installing a 60kW Titan DC Charger at your location:

{% embed url="<https://drive.google.com/file/d/1VQwdLSkEjd2VoOZZY082o2HQjVw4hMwv/view?usp=sharing>" %}

Alternatively, you can make a copy of this below document, fill it out, and send it to our email: <chargers@decharge.network>:

{% embed url="<https://docs.google.com/document/d/1724hBEmN8YalJ1rLtpTJFimuCZEwCidUgPTUW18_bRc/edit?usp=sharing>" %}