Titan Mini (30kW)

In addition to the General Requirements mentioned here, the device specific requirements for DeCharge Titan Mini (30kW) device are as follows:

Mounting and Foundation

• Concrete base prepared as per DeCharge installation blueprint

• Safety clearance of at least 0.5 meters on all sides

• Anchor bolts installed and visible

• Canopy or shed installed for protection

Power Input Requirements

Voltage	Transformer	Cable Size	Breaker Size
415V	50 KVA	35 sq.mm aluminium or 25 sq.mm copper	72A

• Breaker panel must be within an accessible range

• Neutral wire of 0.5 core must be connected using proper lugs

• Neutral-to-earth voltage must be below 2V

Earthing

• Two earthing pits required

• Cabling: 25 x 3 mm tinned copper bus bar or 25 sq.mm single-core copper wire

• Lugs: Ring-type aluminium or copper lugs for grounding points

Internet Connectivity

• LAN: Cat6 cabling with proper termination and surge protection

• 4G/5G SIM: Valid SIM with strong signals

• Wi-Fi: High-speed router, no competing devices, good coverage

Safety Infrastructure

• Safety bollards installed

• LED lighting in place

• Fire suppression systems if required by local code

• Security arrangements if in a commercial or public location

Documentation Required

• Confirmation of grid connection or power availability

• Approved CMS form with device mapping

• Signature of host or location owner

• Photographs of breaker, cables, and mounting area

Please fill out the interest-cum-pre-requisite form if you're interested in installing a 30kW Titan Mini DC Charger at your location:

Alternatively, you can make a copy of this below document, fill it out, and send it to our email: [email protected]:

https://docs.google.com/document/d/17Jw4UpsdAUU0RTuNZlAQIaSnWsfC8bjBkfiFVgN-xhs/edit?usp=sharingdocs.google.com