Beast (7.4kW)
In addition to the General Requirements mentioned here, the device specific requirements for DeCharge Beast (7.4kW) device are as follows:
Mounting
Mounting Type: Wall or Pole
Location: Parking slot/garrage/business, etc,.
Is the charger exposed to direct sunlight? If yes, a canopy needs to be installed
Power Input
Voltage: 230V ± 30%, 50Hz
Input Current: 32A
Breaker: 40A, 2-pole MCB installed
Cable: 3-core, 10 sq.mm copper wire with crimped lugs
Power outlet within 15 meters of mounting point
Earthing
Earthing pit or grounding line is present
Neutral-to-earth voltage less than 2V
Wiring sequence: Line, Neutral, Earth - not reversed
Internet Connectivity
Must have one of them:
Wi-Fi: Speed of 100 Mbps or more, router within range, no high-load devices connected
4G SIM: Strong signal, non-M2M SIM card installed and activated
Approvals and Documents
Host or site ownership proof (Lease or Ownership document)
Signed terms and conditions (shared by DeCharge)
Submitted CMS form (Charging Management System template)
To get DeCharge Beast devices (delegated / self-deployed), click on the link below:
If you are opting for self-deployment, please fill out the pre-requisite details for the Beast device after checkout::
Alternatively, you can make a copy of this document, fill it out, and send it to our email: [email protected]:
Last updated
Was this helpful?