Mini (3.3kW)
In addition to the General Requirements mentioned here, the device specific requirements for DeCharge Mini (3.3kW) device are as follows:
Mounting
Mounting Type: Wall or Pole
Location: Parking slot/garrage/business, etc,.
Is the charger exposed to direct sunlight? If yes, a canopy needs to be installed
Power Input
Voltage: 230V ± 15%, 50Hz
Input Current: 16A
Breaker: 20A, single pole MCB installed
Cable: 3-core, 2.5 sq.mm copper wire with crimped lugs
Power outlet within 15 meters of mounting point
Earthing
Earthing pit or grounding line is present
Neutral-to-earth voltage less than 2V
Wiring sequence: Line, Neutral, Earth - not reversed
Internet Connectivity
Must have one of them:
Wi-Fi: Speed of 100 Mbps or more, router within range, no high-load devices connected
4G SIM: Strong signal, non-M2M SIM card installed and activated
Approvals and Documents
Host or site ownership proof (Lease or Ownership document)
Signed terms and conditions (shared by DeCharge)
Submitted CMS form (Charging Management System template)
To get DeCharge Mini devices (delegated), click on the link below:
https://sales.decharge.network/mini
Want to install the DeCharge Mini Devices at your location? Fill the form in the webpage below:
Last updated
Was this helpful?